MX Series Spring Machine

Computer Controlled Spring Making Machine

After installing the tools, you only need to enter the program , thus achieving minimum set-up times, maximum productivity and cost-effective manufacture.

The position of the body tool can be controlled three-dimensionally as the body slide is equipped with an outside diameter axis.

 

 

forming machine

MX Series Spring Making Machine Features

  • Servo Swing Mechanism numerically controls the lateral (right / left) position of all slides, thus the initial tension of the spring body or the offset position of the Spinner is easily adjusted.
  • Rotary wire feed and rotary wire guide mechanisms enable easy formation of complex parts without changing the position of the slides.
  • Apart from the body slides, all tool slides are controlled by independent servo motors, via a crank mechanism, resulting in high-speed, precise operation.
  • A rack and pinion drive mechanism is available as an option and can be applied to all linear motion slides. This mechanism makes it possible to control the in and out position of the spinner, pitch tool, etc. at a constant speed.
  • The image sensor can be installed on the latest computer as an option.
  • On MX-40A, the dual action spinner is supplied as standard. This spinner rotates the arbor as well as the spinner tool (optional on MX-20B & MX-30).
MX-8 MX-10 MX-20B MX-30 MX-40A
Forming Capability Wire Dia. 0.2-0.8mm 0.2-1.0mm 0.5-2.0mm 1.5-3.0mm 1.5-4.0mm
Peripheral Device Control 12ports 12ports 12ports 12ports 12ports
Power Requirement 3 Phase 20A 20A 30A 50A 50A
Machine Dimensions Height 1650mm 1530mm 1993mm 2010mm 2240mm
Width 950mm 800mm 1643mm 1500mm 1940mm
Depth 970mm 870mm 1357mm 1590mm 1910mm
Net Weight 820kg  750Kg 1980kg 2200g 3300kg
Computer Dimensions Height 1600mm 1600mm 2147mm 1600mm 1600mm
Width 540mm 410mm 490mm 410mm 540mm
Depth 540mm 410mm 460mm 4100mm 540mm
Net Weight 210kg 220kg 210kg 220kg 210kg
MX-8 MX-10 MX-20A MX-30 MX-40A
Feed Min. Increment 0.01mm 0.02mm 0.02mm 0.01mm 0.02mm
Max. Speed 70m/min 112m/min 82m/min 73m/min 60m/min
Rotary Wire Feed Min. Increment 0.1deg. 0.1° 0.1deg. 0.01° 0.1deg.
Rotary Wire Guide Min. Increment 0.1deg. 0.1° 0.1deg. 0.01° 0.1deg.
Swing Min. Increment 0.002mm 0.01mm 0.01mm 0.001mm 0.01mm
Stroke +/- 5.5mm +/- 5.8mm +/- 8mm +/- 12mm +/- 15mm
Body Tool Slide
(Rack & Pinion)
Min. Increment 0.01mm 0.001mm 0.01mm 0.001mm 0.01mm
Stroke 42mm 43mm 105mm 120mm 120mm
Tool Slide
(Crank)
Min. Increment 0.01deg. 0.01° 0.01deg. 0.01° 0.01deg.
Stroke 40mm 40mm 100mm 120mm 120mm
Diameter Min. Increment 0.001 0.001 0.01 0.001 0.001
Stroke 8mm 10mm 17.6mm 25mm 26mm
Spinner Min. Increment 0.001 0.001 0.001 0.0001 0.001
Spinner Arbor Min. Increment 0.001
(optional)
0.0001
(optional)
0.001